Skip to main content

Intro to Cyanotypes and Safety

Lesson 20 from: Introduction to Alternative Processing in Photography

Daniel Gregory

Intro to Cyanotypes and Safety

Lesson 20 from: Introduction to Alternative Processing in Photography

Daniel Gregory

buy this class

$00

$00
Sale Ends Soon!

starting under

$13/month*

Unlock this classplus 2200+ more >

Lesson Info

20. Intro to Cyanotypes and Safety

Lessons

Class Trailer
1

Class Introduction

03:03
2

Overview of the Alternative Process

03:31
3

Overview of the Digital Negative Process

10:21
4

Working with Black and White Digital: What You Need

09:17
5

Working With Black and White Digital Images: Color Settings

08:33
6

Working with Black and White Digital Images Lightroom

07:01
7

Working With Black and White Digital Images Photoshop

11:57
8

Working With Black and White Digital Images 3rd Party Plug-ins

07:29
9

Avoiding Key Artifacts

20:26
10

Creating the Step Wedge for Curve Corrections

39:00
11

Organizing Your Adobe® Photoshop® Files and Curves

11:20
12

Setting Up the Printer

20:24
13

Lab Safety and Workspace Set-Up

03:49
14

Setting the Maximum Black Time

12:06
15

Getting the Initial Curve Test Numbers

20:04
16

Correcting the Curve

20:37
17

Printing the Curve

06:08
18

Sharing Curves

08:50
19

Caring for the Digital Negative

12:29
20

Intro to Cyanotypes and Safety

07:46
21

Paper and Brush Types

05:08
22

Coating Process and Cyanotype Chemistry

12:17
23

Making the Cyanotype Print

06:41
24

Washing the Cyanotype Print

12:29
25

Creating Cyanotypes Photograms

14:59
26

Toning Cyanotypes and Cleaning Up the Darkroom

18:43
27

Introduction to Van Dyke Printing

04:36
28

Setting Up the Van Dyke Workstation

05:20
29

Van Dyke Paper and Coating

05:10
30

Van Dyke Exposure and Developing

32:30
31

Van Dyke Troubleshooting and Resources

08:26
32

Van Dyke: Split Toning

18:56
33

Van Dyke: Wash Cycle and Drying

04:33
34

Van Dyke: Clean Up Process

03:51
35

Introduction to Platinum / Palladium Printing

14:15
36

Platinum/Palladium Coating Chemistry and Safety

09:58
37

Platinum/Palladium Paper and Coating Options

22:31
38

Platinum/Palladium Exposure and Development

22:31
39

Platinum/Palladium: Equipment and Supplies

16:48
40

Ink Jet Negative Coating and Exposure

15:25
41

Platinum/Palladium Chemistry Options

07:50
42

Ink Jet Negative Development

03:45
43

Platinum/Palladium Waxing Images

08:40
44

Platinum/Palladium Troubleshooting and Resources

27:19
45

Sharing Your Work Digitally

14:49
46

Archivability

10:39
47

Matting and Framing Options

30:22
48

Editions and Signing Options

13:54
49

Alternative Processes: Further Exploration

07:25

Lesson Info

Intro to Cyanotypes and Safety

Alright, I'm super excited about this. It's the first time I've processed this much at the studio. We did film a couple months ago, but this is a little bit bigger undertaking, so I'm pretty excited about this. Cyanotype, Cyanotype process is an amazing, amazing process. It's one of our early photographic processes. It was created by a person named Sir John Herschel, who when you study the history of photography, John was responsible for all sorts of stuff. He's responsible for fixer, to help stabilize prints. He's responsible for cyanotypes. There's just like a huge, huge part of his life ended up being a foundations of photography, and the interesting thing about a Cyanotype was he wasn't actually looking to create a photograph. He was trying to create a new way to make blueprints, and it just happened to be a side piece off of that. And there are still thousands and thousands of people who participate in cyanotypes everyday. It's a very popular process still, because it's super easy...

. It's one of our easiest processes, and it's also one of our safest, and it's very, very versatile. The things you can do with it are pretty amazing, so you're not really limited to just being stuck with a digital negative, so to speak. So, we'll talk a little bit more about some of the things you can do with Cyanotypes as we move through the afternoon. In general, the way any these, all processes work is we're going to start and we have to sensitize and coat the paper, the paper then has to dry. The negative goes on it, it's going to go in to our exposure box, then it goes through some type of development process. Each process is a little unique, but very similar, so you'll kind of get a rhythm. Once you can kind of do a cyanotype, it's easy to do a Vandyke, it's easy to do a platinum print, it's easy to do a salt print, argyrol print. A process is pretty consistent, which is one of the things that's nice. It's just the chemistry that changes. We're also going to try to show you a variety of different ways you can actually coat paper. Different types of papers to work with, so over the next session and then tomorrow with those sessions, you're going to get exposed, I think, to a lot of different aspects of this. So, we'll go ahead and jump right in. The first thing I want to talk about though, before we get too deep into this, is we wanted to talk about safety. So, I mentioned it a little bit earlier, but we have safety in the dark room is something that's really important and particularly as we start to get involved with the chemistry, it's even more important. Like I said, cyanotype isn't a hugely volatile, or chemically difficult, or a dangerous process, but we're going to go ahead and just kind of review some of the general rules I like to use in all of my dark rooms, but like cyanotypes, you can literally make a bed sheet into a cyanotype and lay on it. So, in the grand schemes of things, it's not too bad, but in general, I always wear safety glasses when I'm in the dark room, and I get kinds that wrap around the edges of my eyes, so I don't want anything to splash up. I used to not be so adamant about safety glasses in the dark room, and then my partner in life, and my artistic partner, Lori, was like, "You know, as a photographer, I would think "you'd be a little more protective of your eye sight." I was like, "Huh, that's true," and after that, I pretty much wear safety glasses all the time. The other thing I wear all the time now is I wear gloves, and these are Nitrile gloves, and I prefer Nitrile gloves over other types of gloves because one, they don't allow chemical particulate to pull through. So like rubber gloves for dish washing, like some of the chemicals are small enough they can actually leach through the rubber gloves. Also, latex gloves actually don't stop the same level of particulate and you can develop an allergy to latex, so I like the Nitrile gloves. They come in a variety of sizes. You can get them from auto repair places, you can get them from Amazon, you can get them at grocery stores sometimes. They come in a variety of colors. So, and they're cheap enough that I don't have to worry about if one tears, or one rips. They can just go in the trash and get recycled. So, I always like to have on gloves when I'm working in the dark room. Sometimes, I'll wear one glove if I'm working back and forth between the computer, I usually actually just keep my hands clean and dry, and then I have one to actually work the computer with. So with the digital aiding process, sometimes I've got at least one glove on. The other piece is a chemical mask. So, in the dark room, in general, there's three things that we can have run into problems from a safety stand point. We can breath in, we can absorb, or we can ingest. Those are the three ways we suffer from chemical problems in the dark room. Ingesting is easily solved by not having food in the dark room, by not eating it. Which sounds funny, but you'd be amazed at what people put in their mouths. In the dark room, I've watched people come in and they've got a sandwich and they'll literally set it down on the table, and we're like, "Okay, that's going into the trash." They're like, "Nah, it will be fine." Absorption, which is why we wear gloves and usually have on an apron or longer sleeves, so you don't actually have the chemicals hit you. And then, the mask is for dealing with airborne particulate or fumes, so there's certain odors in the dark room that people are highly sensitive to, so you can wear a mask that works for particulate or fumes. These canisters actually pop off, and are replaceable. If you buy one of the bigger masks, this is from three AM. I just got it at home supplies store, but the cartridges come in different formats. This cartridge is for particulate, I have ones for fumes and I have one that does both. So you can just put those on, and then the key is this just goes over, you got to make sure it's snug enough that when you basically cover the breathing hole, it puffs your cheeks out, so that's how you know it's snug enough, and I wear this anytime I'm mixing dry chemistry. The little dust mask that you use for like, you see for dry wall repairs and stuff like that. The particulates not quite fine enough and so I always prefer to wear a mask like this. They're not that expensive, they come in a variety of sizes, but this is something, anytime I'm working with mixing up dry chemistry for the most part, I wear my mask. There's some things we'll talk about from a safety stand point that can help mitigate that. Can you grab that, Gina? That will mitigate that, to help, but I still like to prefer to wear the mask. Other than that, you can see we put down a piece of plastic over the table. I like to make sure that anything that's got a porous surface on it is protected by some kind of plastic so that the chemicals won't leach into the table. In the case of cyanotype, it would leave a blue stain, so if you have a really nice table, and you spill cyanotype chemistry on it, it will turn potentially blue. Silver nitrate will stain, so there's a lot of things that'll stain that, so I like to have a coated surface for the table. You also want to make sure that everything has got a label on it, so these are labeled. This is from the first part of the kit from Bostick and Sullivan, that's the cyanotype, A and B parts. And so, you want the chemistry labeled. You want to make sure you're paper's labeled. You want to know what everything is in the dark room at all times. What you don't want to do is reach over and grab a glass of something that you don't know what it is, because how things get mixed, the order they get mixed in can be critical. But if everything's got a label, you'll be a lot better off, in that regard. And then, other than that, I like to make sure I have enough space, so it's going to be a little bit interesting here, because we're going to be moving parts of the dark room around left and right. Shifting so you guys can easily see what's going on, but in general you want to set for a safety reason, and from a cross-contamination chemicals, and from keeping things dry that need to be dry. Usually you have you're dark room split into a wet side and a dry side. So, you're going to be coating and keeping your stuff that needs to stay dry on one side, and then your trays that have water would be on the other side. In my dark room, there's a little wall partition I put up, just so something can't spill across. So, even without very much room, you can successfully work in the dark room.

Class Materials

Bonus Materials with Purchase

Alternative Processing Handout.pdf
Grayscale Percentage to RGB Values.pdf
MSDS Saftey Datasheets.zip
Bostick Discount Code.pdf
Matt Cutting Cheat Sheet.xlsx
Step Wedge Creation Spreadsheet.xlsx
Alternative Process Actions.zip
11stepwedge.psd
21stepwedge.psd
50stepwedge.psd

Ratings and Reviews

Diordna
 

For a long time, I have read, studied and tried alternative processing, mainly Platinum/Palladium printing. I want to create longest lasting prints and may be share the info at Creative Live. But this presentation saved me many a hours. A few minutes into the lecture, I purchased the class and as the class progressed, I was extremely glad. Thank you Creative Live, thank you Daniel Gregory.

SFX
 

Excellent class on Alt Process and fantastic bonus materials included with purchase!!! I have extensive digital printing and darkroom experience but haven't done much alt-process to date. This is perfect timing for me as I have several personal projects that I would like to re-visit using some of these techniques. Thank you Daniel!!!

James H Johnson
 

I have been making platinum/palladium prints for about 1 year. This is the 3rd workshop that I have attended. The first two were one on one. Daniel has done a fantastic job of covering the material and explained the process it detail and easy to understand. This course is fantastic and highly recommend it.

Student Work

RELATED ARTICLES

RELATED ARTICLES